Description
Configuration matched to material — Every ECO 2700 leaves our Linyi workshop only after the buyer’s clay sample has been pressed under controlled conditions, confirming that the 16 MPa hydraulic setting produces a clean interlock profile without lamination cracks.
Technical Specifications
| Parameter | Value |
|---|---|
| Model | ECO 2700 |
| Product Type | Clay Interlocking Brick Making Machine |
| Overall Dimensions (L×W×H) | 1000 × 1000 × 1800 mm |
| Shaping Cycle | 15–20 seconds (basis not stated in source — confirm block format and clay moisture) |
| Hydraulic Pressure | 16 MPa |
| Rated Power | 5.5 kW |
| Total Weight | 1000 kg |
| Control System | Manual operation — pressing mechanism requires no electrical power |
| Mould Format | Interlocking clay block |
| Voltage & Frequency | 380V / 3-phase / 50Hz (configurable to local supply before dispatch) |
| Warranty | 1 year |
Application Suitability
| Application | Material or Output |
|---|---|
| On-site housing project brick production | Locally sourced clay with sand content verified by pre-shipment sample test |
| Small-format interlocking block workshop | Clay or stabilized soil blends, manual pallet handling |
| Distributor resale stock for rural construction | Compact interlocking clay bricks for low-rise masonry |
| First-plant entrepreneur trial runs | Clay mixes adjusted to regional aggregate availability |
What "Clay Interlocking Brick Machine in Stock" Actually Means for Your Timeline
Availability only matters if the unit is configured for your voltage, your clay, and your mould format before it ships.
I have watched containers arrive at port with the wrong voltage sticker on the panel and a mould sized for a block the buyer’s market does not use. The ECO 2700 clay interlocking brick machine in stock sounds convenient, but a stocked frame sitting in the yard still needs the right motor, the right mould cavity, and the right hydraulic pressure setting before it can produce a sellable brick. [NEED_CITE: machinery export voltage and frequency requirements by destination country] Skipping that pre-shipment verification adds weeks of idle time once the crate is opened on site.
Dispatch Readiness Without the Guesswork
When a buyer asks whether the ECO 2700 clay interlocking brick machine in stock can ship this week, the honest answer depends on three checks: the mould cavity matches the target interlocking format, the motor winding matches the destination grid, and the hydraulic fluid has been drained for sea transport. We confirm all three before a proforma invoice is issued, so the dispatch date on paper matches the date the container door closes.
Container Loading and Dismantling for Transit
The ECO 2700 weighs 1000 kg and stands 1800 mm tall, meaning it fits a standard 20-foot container without partial dismantling of the main frame. The hydraulic cylinder and pressing lever are detached and strapped to the base to prevent movement during ocean transit. Packing photographs are taken at three stages — bare machine, secured in crate, and container door seal — and sent to the buyer before the vessel sails. [NEED_CITE: standard container loading practices for small industrial machinery]
Reading the Numbers That Matter
The 16 MPa hydraulic pressure is the figure that decides whether interlocking clay bricks survive handling and stacking. At this pressure level, clay with moderate sand content compresses into a dense interlock profile; clay with high moisture will simply squeeze out of the cavity. The 15–20 second shaping cycle gives a theoretical rhythm, but real output depends on how fast an operator can load clay, close the mould, and pull the finished brick — a rhythm that varies with operator count and clay consistency. The 5.5 kW rated power covers the small motor driving the hydraulic pump, keeping energy draw low enough for generator-fed sites where grid supply is unreliable.
The Cost of Ordering Without a Material Test
Buyers who skip the sample test often discover on site that their local clay does not hold the interlocking tongue under 16 MPa — the brick cracks along the locking groove and becomes unsellable. Reworking the mix on site means sourcing new additives, retraining workers, and burning through raw material before the first good brick appears. That delay is invisible on the order form but very visible on the project Gantt chart. [NEED_CITE: clay soil composition variability and its effect on compressed brick strength]
Why Buyers Source This Unit Through Our Linyi Workshop
The ECO 2700 is built around a single-focus block machinery line, meaning the mould, hydraulic cylinder, and pallet dimensions are specified together rather than sourced from three different vendors. Stock availability is quoted against real warehouse inventory, not a production plan that has not started. Voltage and frequency are confirmed in writing before the motor is wired, so the machine does not arrive needing a transformer the buyer did not budget for. Pre-shipment factory tests run the buyer’s own clay sample through the mould, producing a test record that travels with the machine. Container loading plans are drawn for every shipment, preventing the unpleasant surprise of a unit that does not fit through the container door.
Documentation & Verification
- Factory test record pressed from buyer-supplied clay sample before dispatch
- Container loading photographs at bare, crated, and sealed-door stages
- Voltage and frequency confirmation sheet signed before motor wiring
- Operation and maintenance manual in the buyer’s requested language
- Hydraulic and electrical schematic for on-site troubleshooting
- Customs documentation package matched to destination port requirements
Installation, Commissioning & Support
- Foundation pad must be level within tolerance to suit the 1000 × 1000 mm footprint and 1000 kg static load
- 380V three-phase supply with dedicated circuit breaker sized for 5.5 kW motor inrush current
- Hydraulic cylinder reattached on site using included fasteners and filled with specified oil grade
- First-run commissioning includes mould alignment check and pressure adjustment to match local clay
- Operator training covers clay moisture window, cycle rhythm, and daily mould cleaning routine
- Wear parts list with reorder codes for hydraulic seals and mould liner plates
What We Need to Confirm Before Quoting
Send us a clay sample — roughly 20 kg — along with your target interlocking block dimensions and the voltage at your site. We will run a pressing test at 16 MPa, record the cycle rhythm, and return the test bricks with a capacity note tied to your specific format. That is the only way the dispatch date we quote stays firm.
Frequently Asked Questions
Q: Is the ECO 2700 currently in stock, and what is the dispatch lead time?
A: Stock status is confirmed against live warehouse inventory at the time of inquiry. If the base unit is on the floor, dispatch lead time covers mould fitting, voltage verification, and packing — typically a matter of days rather than weeks. We provide a firm dispatch date on the proforma invoice, not an estimate.
Q: How is the machine packed and loaded into a container for shipment?
A: The hydraulic cylinder and pressing lever are detached and secured to the base frame. The 1000 kg unit fits a standard 20-foot container. Packing photographs are shared at three loading stages so the buyer sees exactly how the machine is secured before the container is sealed.
Q: What voltage options are available, and is customization confirmed before shipping?
A: The standard supply is 380V three-phase 50Hz, but motor winding can be configured to match the buyer’s local grid. Voltage and frequency are confirmed in writing before wiring begins, and a confirmation sheet is included in the documentation package so there are no surprises at commissioning.
Q: How long does sea freight typically take to my port, and can arrival be estimated upfront?
A: Sea freight duration depends on origin port, destination port, and carrier routing. We provide an estimated transit window based on the shipping line’s published schedule at the time of booking. Arrival estimates are advisory and subject to port congestion and customs clearance speed.
Q: What documents are included with shipment?
A: The documentation package contains the packing list, commercial invoice, bill of lading, factory test record, operation and maintenance manual, hydraulic and electrical schematics, and any customs paperwork required by the destination country. Specific document requirements are confirmed during the order stage.
