Description
Stocked and Ready to Ship — QT6-15 fully automatic hydraulic block machines are held in inventory with dispatch timelines and container loading plans confirmed before you commit, so project deadlines stay intact.
Technical Specifications
| Parameter | Value |
|---|---|
| Model | QT6-15 |
| Product Type | Fully Automatic Hydraulic Block Making Machine |
| Overall Dimensions (L×W×H) | 8200×1700×2950 mm |
| Total Mass | 7 T |
| Overall Power | 37 kW |
| Vibration Form | Platform Vibration |
| Vibration Frequency | 0-60 Hz |
| Vibration Force | 45 kN |
| Pallet Size | 880×850 mm |
| Moulding Mode | Load automatically, vibration moulding |
| Molding Cycle | 15-20 s (hollow/solid blocks); 20-25 s (pavers) |
| Demolding Method | Hydraulic |
| Hydraulic System | Independent integrated type hydraulic station |
| Control System | PLC (Programmable Controller) with touch screen |
| Block Compressive Strength | >15 MPa |
| Fault Diagnosis | Built-in fault diagnosis system |
| Safety Logic | Advanced safe logic circuit with action interlock |
| Factory Area | 1200 m² |
| Output (400×200×200 mm hollow block) | 1080-1440 pcs/hour, 8640-11520 pcs/8hr |
| Output (400×150×200 mm hollow block) | 1440-1920 pcs/hour, 11520-15360 pcs/8hr |
| Output (240×115×53 mm solid brick) | 5760-7680 pcs/hour, 46080-61440 pcs/8hr |
| Output (200×100×60 mm rectangular paver) | 2160-2880 pcs/hour (basis: 20-25 s cycle) |
| Output (225×112.5×60 mm zigzag paver) | 2160-2880 pcs/hour (basis: 20-25 s cycle) |
Application Suitability
| Application | Material or Output |
|---|---|
| Hollow block production | Crushed stone, sand, cement, fly ash, slag aggregates |
| Solid brick production | Standard masonry mix with reduced cement dosage |
| Rectangular paving brick | High-density paver mix on 880×850 mm pallets |
| Zigzag interlocking paver | Interlocking profile mix with extended 20-25 s cycle |
| Porous block production | Lightweight aggregate blends for permeable formats |
What "8,640 Blocks Per Shift" Actually Means on Your Site
Capacity numbers only hold when the block format, cycle time, and material mix all match the quoted basis.
Every QT6-15 block machine in stock comes with output figures tied to specific block dimensions. The 8,640-piece per shift figure assumes 400×200×200 mm hollow blocks at a 15-20 second cycle. Switch to pavers and the cycle extends to 20-25 seconds, shifting daily output to a different range entirely. I have watched buyers order based on a single headline number, then discover on arrival that their target format runs at a substantially different rate. That gap between expectation and reality is where project schedules break down. The dispatch lead time on a stocked unit is short, but the real question is whether the capacity figure matches the block your market actually buys [NEED_CITE: block format demand varies by regional construction standards].
Dispatch Timing You Can Plan Around
The QT6-15 block machine in stock is ready for container loading without the typical multi-week production wait. Dispatch lead time is confirmed at the quotation stage, not after payment. Machines are dismantled to fit standard container dimensions, and the loading plan is shared before the container is sealed so you know exactly what arrives and how it fits your unloading equipment.
Stocked Mould Availability Determines First-Day Output
A machine ships fast, but it only produces what the mould allows. Standard moulds held alongside the QT6-15 block machine in stock define which block formats you can run from day one. If your market needs a specific hollow block or paver profile, confirming mould stock before ordering avoids a situation where the press arrives but the format you sell most is weeks away [NEED_CITE: mould lead times for non-standard block profiles].
Hydraulic Isolation and Vibration Tuning for Consistent Density
The independent integrated hydraulic station sits apart from the main machine vibration and dust, which matters on a block line running continuous shifts. Platform vibration at 0-60 Hz with 45 kN force works against the 880×850 mm pallet to compact the mix evenly. The 37 kW overall power drives both the hydraulic demolding and the vibration system. Compressive strength above 15 MPa is achievable when the vibration force and hydraulic pressure are matched to the actual aggregate and cement ratio in use — a setting that varies by region and raw material source.
The Hidden Cost of Skipping Voltage and Language Confirmation
Arriving machines that run on the wrong voltage or display PLC menus in an unreadable language sit idle until an electrician or translator arrives. The QT6-15 control system is configurable, but voltage, frequency, and display language must be locked in before the machine leaves the factory. I have seen commissioned machines delayed by days because the 50 Hz assumption did not match the local 60 Hz grid, and rewinding a motor on site is not a quick fix [NEED_CITE: voltage and frequency standards by export market].
Why Buyers Source This Machine Here
Block machinery is the single production focus, so the press, mould, pallet, and handling equipment are specified as one matched system. Stocked QT6-15 units ship with pallets sized to the 880×850 mm specification, aligned with the curing rack and forklift setup the buyer already operates. Container loading plans and dismantling methods are confirmed upfront rather than discovered at the port. Capacity calculations are stated per block format, not buried behind a single headline number. Factory test records are available before dispatch, showing the machine running with the buyer’s target mould installed.
Documentation & Verification
- Factory test record showing cycle time on your specific block format before dispatch
- Machine specification sheet with confirmed voltage, frequency, and PLC language
- Mould drawing and format list for every standard mould included in the shipment
- Hydraulic and electrical schematic matching the as-built configuration
- Packing photographs showing dismantling method and container loading arrangement
- CE declaration documentation where applicable to destination market
Installation, Commissioning & Support
- 8200×1700×2950 mm footprint requires level concrete pad within 1200 m² factory area
- 37 kW total power demands dedicated circuit matching confirmed voltage and frequency
- Machine ships dismantled; reassembly sequence provided with container loading plan
- PLC touch screen commissioning includes cycle parameter tuning to local aggregate
- Operator training covers mould change procedure and built-in fault diagnosis system
- Wear parts list and hydraulic seal kit identified for first replacement cycle
Before You Request a Quote
Send the block format your market sells most, along with the daily volume you need to hit. Include your local aggregate type and any cement reduction targets, since the vibration and pressure settings depend on the mix. Confirm your site voltage, frequency, and the language your operators read on a touch screen. If you already have pallets, curing racks, or forklifts on site, share their specifications so the pallet size and handling setup align from day one.
Frequently Asked Questions
Q: Which QT6-15 models and standard moulds are currently in stock?
A: Stocked QT6-15 machines are fully automatic hydraulic units with PLC touch screen control and the 880×850 mm pallet configuration. Standard moulds held in inventory typically include common hollow block and solid brick formats. Specific mould profiles available at any given time are confirmed at the inquiry stage, along with which formats can ship in the same container as the machine.
Q: What is the dispatch lead time and how is the machine packed for container shipment?
A: Dispatch lead time for stocked QT6-15 units is confirmed at quotation and is significantly shorter than made-to-order production cycles. The machine is dismantled to fit standard shipping containers, and a detailed loading plan with photographs is shared before the container is sealed. Dismantling and reassembly instructions accompany every shipment.
Q: What arrival estimate can I expect once shipped?
A: Arrival timing depends on destination port and shipping route. Once the container is booked, the estimated transit duration is provided so you can plan site preparation and unloading resources. Stocked dispatch means the machine enters the shipping pipeline sooner, compressing the total wait from order to arrival.
Q: Are pallets included in the stocked package, and what pallet size ships with the machine?
A: Pallets sized 880×850 mm ship with the QT6-15 as standard, matched to the platform vibration area and mould dimensions. The pallet material and quantity included are confirmed at the quotation stage. If your existing curing racks or forklifts require a different specification, that must be discussed before dispatch.
Q: Can I add extra moulds from stock to the same shipment?
A: Additional standard moulds held in inventory can be loaded into the same container as the QT6-15 machine, provided they are confirmed available at the time of order. Each added mould expands the block formats you can produce immediately on arrival. Mould drawings and format lists for every included mould are provided in the documentation package.
