Description
Fast Dispatch, No Waiting — the QMY6-25 mobile block machine in stock is ready for container loading the moment your voltage and mould specs are confirmed.
Technical Specifications
| Parameter | Value |
|---|---|
| Model | QMY6-25 |
| Product Type | Mobile Hydraulic Block Making Machine |
| Main Vibration Form | Three-dimensional excitation |
| Vibration Frequency | 3200 Hz |
| Moulding Cycle | 25-30 s |
| Overall Power | 9.6 kW |
| Moving Method | Automatic movement with hydraulic steering |
| Pallet Requirement | No pallet required (egg-laying type) |
| Output Capacity (Hollow Block 400×200×200mm) | 1080 pcs/hour, 8600 pcs/shift (8 hours) |
| Output Capacity (Hollow Block 400×150×200mm) | 1260 pcs/hour, 10000 pcs/shift (8 hours) |
| Output Capacity (Solid Block 400×120×200mm) | 1620 pcs/hour, 12960 pcs/shift (8 hours) |
| Output Capacity (Solid Block 400×100×200mm) | 1800 pcs/hour, 14400 pcs/shift (8 hours) |
| Automation Level | Semi-automatic (one-person operation) |
| Overall Dimensions | 2000×2100×1650 mm |
| Warranty | 1 year (excluding spare parts) |
Application Suitability
| Application | Material or Output |
|---|---|
| On-site hollow block production | Crushed stone, sand, cement, and water mix laid directly on compacted ground |
| Housing project solid block supply | Local aggregate and cement for 400×120×200mm and 400×100×200mm solid formats |
| Remote construction camp block making | Self-propelled operation without fixed plant, batching plant, or curing racks |
| Entrepreneur first block operation | Low-infrastructure start producing hollow and solid blocks with a single operator |
What "8600 Blocks Per Shift" Actually Means on Your Site
The QMY6-25 cycle time and shift capacity are rated against specific block dimensions — change the format, and the number changes with it.
When a mobile block machine in stock is quoted at a single daily figure without naming the block size behind it, buyers end up short. I once saw a contractor in West Africa plan an entire foundation schedule around a number that assumed a 100mm solid block, while the site actually needed 200mm hollow blocks. The machine was fine; the expectation was wrong. That is why every capacity figure on this page is tied to a specific format. The real question is never "how fast does it run" but "how fast does it run the block my market buys." [NEED_CITE: common misalignment between quoted block machine capacity and actual site output]
Eliminating the Pallet Cost That Breaks Small-Site Budgets
Most block machines require a pallet for every moulding cycle, which means purchasing hundreds of pallets, building curing racks, and assigning workers to move them. The QMY6-25 is an egg-laying machine: it deposits the freshly pressed block directly onto the ground and moves forward. There is no pallet purchase, no pallet handling labour, and no rack infrastructure. For a contractor working a housing project with a limited footprint and no forklift, this removes an entire cost category from the setup.
Stock Availability That Matches Your Project Timeline
The value of a mobile block machine in stock is not the machine itself — it is the gap between the day you need blocks on site and the day the container clears your port. The QMY6-25 is held in ready-to-ship condition, meaning the lead time is driven by shipping logistics, not production scheduling. Once your destination port, voltage, and mould format are confirmed, the dispatch sequence begins immediately. For project contractors working against a construction deadline, this is often the difference between starting on time and paying idle crew costs for weeks. [NEED_CITE: project delay costs from equipment lead time in remote construction]
How Vibration Frequency and Cycle Time Shape Block Density
The 3200 Hz three-dimensional vibration and the 25-30 second moulding cycle are not independent numbers — they work together to compact the mix. Higher vibration frequency breaks air pockets in stiff, low-slump concrete, while the cycle time determines how long that compaction force is applied. If the cycle is too short for a dense aggregate mix, the block leaves the mould weak and crumbles during handling. If it runs longer than necessary for a lighter mix, you lose output without gaining strength. The QMY6-25 hydraulic system and vibration settings are adjusted to the buyer’s mix before dispatch so the cycle time matches the material actually available on site.
The Hidden Cost of Skipping a Voltage Check Before Loading
A mobile block machine arriving at a job site with the wrong voltage or frequency is not a minor inconvenience — it is a dead machine. The 9.6 kW motor and hydraulic pump on the QMY6-25 must match the local power supply exactly. I have seen machines sit idle for weeks because a 380V/50Hz unit was shipped to a site running 440V/60Hz, and the local electrician could not source a compatible transformer. Voltage, frequency, and control panel language are confirmed during the order stage, not after the container is sealed. [NEED_CITE: electrical mismatch issues in exported industrial machinery]
Why Buyers Source the QMY6-25 Through This Channel
Single-focus block machinery sourcing means the machine, mould, and handling approach are specified as one matched system. The QMY6-25 ships with the mould format your market requires, not a default catalogue option. Configuration is set against your local aggregate and mix design, avoiding the costly material substitution that happens when a machine is tuned for sand you cannot source. Stock holding in Shandong allows dispatch timing to be quoted in days, not production weeks. Mould design and supply extend to custom formats drawn to your specification, so the machine produces the blocks your buyers actually pay for.
Documentation & Verification
- Factory test record using your specified block format and cycle time before container loading
- Mould drawing and format list matching the exact block dimensions you confirmed at order
- Voltage and control language confirmation sheet signed off prior to dispatch
- CE declaration documentation provided where applicable to destination market
- Packing photographs showing dismantling arrangement and container loading plan
Installation, Commissioning & Support
- Compacted ground surface required; no concrete foundation needed for the 2000×2100×1650 mm frame
- 9.6 kW power supply with dedicated circuit matching confirmed voltage and frequency
- Machine arrives partially dismantled for container fit; reassembly on site with hydraulic steering check
- First-run moulding cycle verified against your local mix to confirm 25-30 second timing
- Single-operator training covering hydraulic steering, mould change, and vibration adjustment
- Wear parts list and mould spares shipped inside the container with the machine
Before You Request a Quote
Send your target block format with exact dimensions, the daily output you need to keep the site on schedule, and your local voltage and frequency. If your aggregate is crusher dust, river sand, or a high-clay material, share that detail so the test run before dispatch matches reality. Let us know your destination port so an arrival estimate can be quoted alongside the machine.
Frequently Asked Questions
Q: Which block formats ship with the QMY6-25 and what is the daily output per format?
A: The machine is stocked with moulds for 400×200×200mm hollow blocks at 8,600 pieces per 8-hour shift and 400×100×200mm solid blocks at 14,400 pieces per shift. Additional formats are available; output changes with each size.
Q: What is the dispatch lead time and estimated arrival at my port?
A: The QMY6-25 mobile block machine in stock ships once voltage, frequency, and mould format are confirmed. Lead time is measured in days for loading, and arrival is quoted based on your destination port at order.
Q: How is the machine packed and loaded into a shipping container?
A: The QMY6-25 is partially dismantled to fit container dimensions. Packing photographs are provided showing the loading arrangement, and reassembly instructions are included for on-site setup.
Q: Can the voltage and frequency be set to match my local power supply before dispatch?
A: Yes. Voltage, frequency, and control panel language are confirmed during the order process. The 9.6 kW motor and hydraulic system are configured to your site supply before the container is sealed.
Q: What spare moulds and hydraulic wear parts are included in the shipment?
A: A wear parts list and recommended spare moulds are confirmed at order and packed inside the container with the machine, so replacements are on hand when first maintenance is due.
