Description
Stocked and Ready to Ship — This QT6-15 cement block machine is dismantled, container-planned, and waiting for voltage and language confirmation before dispatch, not weeks of production lead time.
Technical Specifications
| Parameter | Value |
|---|---|
| Model | QT6-15 |
| Product Type | Cement Block Making Machine |
| Overall Dimensions (L×W×H) | 8200×1700×2950 mm |
| Vibration Frequency | 0-60 Hz |
| Vibration Form | Platform Vibration |
| Moulding Mode | Load automatically, vibration moulding |
| Pallet Size | 880×850 mm |
| Molding Cycle | 15-20 s |
| Overall Power | 37 kW |
| Vibration Force | 45 kN |
| Total Mass | 7 T |
| Demolding Method | Hydraulic |
| Factory Area Required | 1200 m² |
| Control System | PLC with touch screen |
| Output Capacity | 1080-1440 pcs/h (based on 400×200×200 mm hollow block, 6 pcs/mould) |
| Output Capacity | 1440-1920 pcs/h (based on 400×150×200 mm hollow block, 8 pcs/mould) |
| Output Capacity | 5760-7680 pcs/h (based on 240×115×53 mm solid brick, 32 pcs/mould) |
| Output Capacity | 2160-2880 pcs/h (based on 200×100×60 mm rectangular paving brick, 21 pcs/mould, cycle 20-25 s) |
| Output Capacity | 2160-2880 pcs/h (based on 225×112.5×60 mm zigzag paving brick, 15 pcs/mould, cycle 20-25 s) |
| Block Compressive Strength | >15 MPa |
| Hydraulic System | Independent integrated hydraulic station |
| Automation Level | Automatic with fault diagnosis system |
| Raw Material Adaptability | Waste ash, slag, and various aggregates |
| Standards | CE compliant |
Application Suitability
| Application | Material or Output |
|---|---|
| Hollow block production | Crushed stone, sand, cement, and fly ash blends for structural and non-load-bearing walls |
| Solid brick production | Dense aggregate mixes for load-bearing masonry and infill |
| Rectangular paving brick | Fine aggregate and cement for driveways, walkways, and commercial plazas |
| Zigzag interlocking paver | Graded aggregates for heavy-traffic pavement requiring mechanical interlock |
| On-site contractor production | Local quarry material and cement for housing project block supply |
What "Pieces per Hour" Leaves Out When You Order a QT6-15 Cement Block Machine in Stock
Every capacity figure on this page is tied to a specific block size, mould cavity count, and cycle time — no generic "up to" claims.
I have watched buyers receive a block machine rated at a headline cycle speed, only to discover that number assumed a small solid brick format they never intended to produce. When they load the mould for a 400×200×200 mm hollow block, the real output drops to a fraction of what they planned their shift around. [NEED_CITE: common capacity misrepresentation in block machinery quotations]. The QT6-15 cement block machine in stock here ships with output tables that name the exact format, cavity count, and cycle seconds behind every number.
Dispatch Timing You Can Build a Project Schedule Around
A stocked QT6-15 cement block machine in stock means the main press, hydraulic station, and PLC cabinet are assembled and factory-tested before your order is confirmed. The machine is then dismantled into container-sized modules — typically the main frame, the hydraulic power unit, and the control cabinet travel as separate secured items inside a 40-foot high-cube container. Dispatch lead time is measured in days for preparation, not weeks for production.
Container Loading and Arrival Planning Upfront
Before payment, you receive a loading plan showing how the press frame, pallet stack, and mould crate are positioned and braced inside the container. This eliminates the guesswork at the destination port when your logistics team needs to know crane capacity and unloading sequence. The arrival estimate is quoted based on your destination port and current shipping schedules, so your foundation work and curing area preparation can run in parallel with transit. [NEED_CITE: typical ocean freight transit windows by major route].
Reading the Specs That Actually Matter on Site
The 45 kN vibration force and independent hydraulic station work together to compact the mix into a dense, consistent block. Platform vibration distributes energy across the full 880×850 mm pallet area, which means blocks at the edges receive the same compaction as those in the centre. The 0-60 Hz adjustable vibration frequency lets operators dial in the right setting for different aggregate gradations — coarser crushed stone needs a different frequency than fine sand-heavy paver mixes.
The 880×850 mm pallet size is fixed for this model, and it determines the curing rack dimensions and forklift tine spacing you will need on the ground. The PLC touch-screen control includes a fault diagnosis system, which displays error codes in the language confirmed before dispatch, reducing the commissioning time for local operators who may not read technical English. Total power draw of 37 kW requires a dedicated circuit with appropriate breaker rating, confirmed against your site’s voltage and frequency before the machine leaves the factory.
The Cost of Skipping the Pallet and Voltage Conversation
A buyer once took delivery of a block machine without confirming pallet dimensions against their existing curing racks. The racks were built for a smaller pallet from a previous machine, and every loaded pallet had to be manually repositioned before curing — a bottleneck that stalled production for over a week while new racks were fabricated. Voltage mismatch is another silent delay: a machine wired for 380V/50Hz arriving at a site running 440V/60Hz cannot be commissioned until a transformer is sourced locally. [NEED_CITE: electrical compatibility requirements for imported industrial machinery]. These are not engineering problems — they are communication failures that a pre-dispatch checklist prevents.
Why Buyers Source This Stocked Model Here
Block machinery is the single focus of this operation, so the QT6-15 is specified as a matched system of press, mould, pallet, and handling — not assembled from separate suppliers who each point at the other when something does not fit. Configuration is set against your actual mix design and local aggregate availability, not a catalogue default that assumes materials you cannot source. Mould design covers the formats your market actually sells, with custom drawings available for non-standard sizes. The automation level allows a buyer to start with the standard PLC-controlled automatic cycle and add pallet feeding or stacking upgrades later as volume grows. Installation and commissioning support includes operator training so the first production run is not a learning exercise on your paying customers’ deadlines.
Documentation & Verification
- Line layout drawing showing press position, pallet flow, and curing area footprint for the QT6-15
- Machine specification sheet confirming pallet size, vibration force, and power rating before dispatch
- Mould drawing and format list for every cavity included in the shipment
- Voltage, frequency, and PLC display language confirmation signed off before crating
- Factory test record documenting cycle times on the specific block format ordered
- Packing photographs showing dismantling, bracing, and container loading sequence
Installation, Commissioning & Support
- Foundation must support 7 T total mass across the 8200×1700 mm footprint with level tolerance
- Dedicated 37 kW power circuit at confirmed voltage and frequency with isolated breaker
- Machine arrives dismantled; main frame, hydraulic station, and PLC cabinet reassemble on site
- First-run commissioning includes cycle time verification on the buyer’s confirmed block format
- PLC fault diagnosis system reviewed with operators in the confirmed display language
- Wear parts list and mould maintenance schedule provided at handover
What to Share When You Are Ready to Move
Send the block format or formats you intend to produce daily, along with your local aggregate type and cement source. Confirm your site voltage, frequency, and the language your operators need on the PLC screen. If you have existing curing racks or forklifts, share the pallet dimensions they accept so the 880×850 mm pallet is verified against your ground setup before the QT6-15 cement block machine in stock is loaded.
Frequently Asked Questions
Q: Is this model in stock and what is the dispatch lead time?
A: The QT6-15 is held as a stocked model, meaning the main press and hydraulic station are assembled and factory-tested before your order is confirmed. Dispatch preparation — dismantling, crating, and container loading — is measured in days once voltage and PLC language are confirmed. Production lead time does not apply to this unit.
Q: How is the machine dismantled and loaded into containers?
A: The main frame, independent hydraulic station, and PLC control cabinet are separated and individually braced inside a 40-foot high-cube container. Moulds and pallets are crated and secured to prevent movement during transit. A loading plan with positioning details is provided before the container is sealed.
Q: What voltage and frequency configurations are available from stock?
A: Voltage and frequency are confirmed against your site supply before dispatch. The machine’s 37 kW power requirement needs a dedicated circuit, and the electrical configuration is set or adapted based on your destination country’s standard. This confirmation happens before crating, not after arrival.
Q: Which block formats are covered by the standard moulds included?
A: Standard moulds cover hollow blocks in 400×200×200 mm and 400×150×200 mm, solid bricks at 240×115×53 mm, and rectangular and zigzag paving bricks. Custom mould designs are available to buyer drawings for formats outside this range. The format list is confirmed before shipment.
Q: What is the estimated arrival time at my destination port?
A: Arrival estimates are quoted upfront based on your destination port and current shipping schedules at the time of order. Transit time varies by route and carrier, so the estimate reflects live booking conditions rather than a fixed number of weeks.
