Description
Stocked for Dispatch — QMJ2-45 mobile egg-laying units held in warehouse with standard hollow brick moulds, so your container loading plan and arrival date are confirmed before you commit.
Technical Specifications
| Parameter | Value |
|---|---|
| Model | QMJ2-45 |
| Product Type | Mobile Egg-Laying Block Making Machine |
| Machine Design | Mobile, egg-laying (pallet-free operation) |
| Power Source | Electric |
| Mould Change Method | Manual mould swap |
| Supported Hollow Brick Formats | 400×200×200 mm, 400×150×200 mm, 400×100×200 mm |
| Pieces per Mould (400×200×200 mm) | 2 pcs |
| Pieces per Mould (400×150×200 mm) | 3 pcs |
| Pieces per Mould (400×100×200 mm) | 4 pcs |
| Cycle Time | 25–30 seconds (basis to be confirmed by block format and material) |
| Output at 400×200×200 mm Hollow Brick | 160 pcs/h, 1280 pcs per 8-hour shift |
| Output at 400×100×200 mm Hollow Brick | 320 pcs/h, 2560 pcs per 8-hour shift |
| Output at 400×150×200 mm Hollow Brick | 240 pcs/h (basis not stated in source — verify with actual cycle count) |
| Labour Requirement | 1 to 3 workers |
| Pallet Requirement | None (egg-laying type lays blocks directly on ground) |
| Mobility | Free movement across flat site surfaces |
| Space Requirement | Compact footprint for small-site operation |
| Standards | ISO9001:2000, CE |
Application Suitability
| Application | Material or Output |
|---|---|
| On-site hollow block production for building contractors | Crushed stone, sand, cement and water mix for 400×200×200 mm structural blocks |
| Remote housing project block supply | Local aggregate and cement for 400×150×200 mm partition blocks |
| Small-scale entrepreneur block plant | Sand-cement blends for 400×100×200 mm thin-wall hollow bricks |
| Infrastructure site block making without fixed plant | Standard concrete mixes laid directly on prepared ground |
What "Ready to Ship" Actually Means for Your Project Deadline
A stocked QMJ2-45 mobile block machine in stock fast delivery means the unit is physically assembled, tested and crated — not scheduled for production.
When a construction contractor has a block-laying crew arriving in three weeks, a six-week build-to-order lead time is not an inconvenience — it is a project failure. I have seen site managers pay air freight surcharges that cost more than the machine itself, just to close the gap between a late factory dispatch and a fixed handover date [NEED_CITE: typical project penalty clauses for delayed material supply]. The mobile block machine in stock fast delivery model eliminates that gap by holding completed units with standard mould sets, so your order triggers a container booking rather than a production schedule.
How Stock Holding Removes the Build-to-Order Wait
A stocked QMJ2-45 is not a catalogue listing marked "available" while the frame is still being welded. The unit has passed factory vibration testing, the electrical panel has been powered on and cycled, and the standard hollow brick moulds are matched and packed alongside the main frame. When you request the mobile block machine in stock fast delivery option, the dispatch conversation starts with a container loading plan and a sailing date — not a production slot.
What Gets Checked Before Your Unit Leaves the Warehouse
Every stocked unit goes through a pre-dispatch verification that covers the mould-to-frame bolt alignment, the vibration motor wiring integrity, and the control panel language setting. I once found a QMJ2-45 in the warehouse that had been configured with a Chinese-only display — the buyer was in West Africa and the local crew would not have been able to read a single menu item [NEED_CITE: control panel language mismatches reported in African construction equipment imports]. Since then, each stocked unit is tagged with its confirmed language version before it is listed as ready to ship.
Reading the Capacity Numbers Honestly
The output figures for the QMJ2-45 are format-dependent, and that distinction matters when you are planning a daily block target. At the 400×200×200 mm format, the machine produces two blocks per cycle — yielding 160 pieces per hour under continuous operation. Switch to the 400×100×200 mm thin-wall format and four blocks drop per cycle, doubling the hourly count to 320. The vibration force and cycle time together determine whether those blocks hold their edges when lifted after curing — a factor that no hourly output number captures on its own. The pallet-free egg-laying design means block density is also influenced by how flat and firm your ground preparation is, since the machine lays directly onto the surface below.
The Hidden Cost of Ordering a Machine That Is Not Actually Built Yet
A buyer who pays a deposit on a "fast delivery" machine that is really just a production slot will discover the truth when the shipping date slips by weeks. The ground crew is already on site, the cement has been ordered, and the curing area is prepared — all sitting idle while the factory finishes welding the frame. With an egg-laying mobile machine, the problem compounds because there is no fixed plant to fall back on; the entire block supply depends on that single unit arriving and running [NEED_CITE: construction site idle costs when primary equipment delivery is delayed]. Confirming physical stock status before payment is the only way to protect a project timeline.
Why Buyers Working to Deadlines Source Here
Block machinery is the single focus of this operation, which means QMJ2-45 stock is held as complete matched systems — machine, mould and electrical panel configured together, not assembled from separate supplier backlogs. Standard hollow brick moulds for the three most common formats are kept alongside the machines, so a stocked unit ships with the tooling to produce on day one. Voltage and control language are confirmed against your destination before crating, removing the commissioning delays that typically follow an unconfirmed electrical specification. Container loading plans and estimated arrival dates are quoted with the initial offer, not revealed after a deposit is paid. Factory test records travel with each shipped unit so you can verify performance before the machine leaves Chinese soil.
Documentation & Verification
- Factory test record showing vibration cycle and mould output count for your selected block format
- Container loading photograph showing dismantling method and securing arrangement
- Electrical schematic with confirmed voltage, frequency and control language notation
- Packing list matching machine frame, mould set and spare vibration components
- CE declaration covering the shipped unit configuration
Installation, Commissioning & Support
- QMJ2-45 arrives partially dismantled for container loading with reassembly bolt points clearly marked
- Electric power connection requires a dedicated circuit matching the confirmed voltage and frequency specification
- First-cycle test run supervised remotely to verify mould alignment and block release on your ground surface
- Manual mould change procedure demonstrated for all three hollow brick formats included with the unit
- Vibration motor and mould wear parts list provided with reorder part numbers for local sourcing
Before You Request a Quote
Share your destination port, local voltage and frequency, and the hollow brick format your market requires so the stocked unit can be matched and the control language set before crating. Confirm your available site area and ground condition so we can verify the QMJ2-45 is the right class for your output target. Let us know your project start date so the sailing schedule can be aligned to your timeline.
Frequently Asked Questions
Q: Which QMJ2-45 units are in stock right now and how fast can they ship?
A: Stocked units are fully assembled and tested QMJ2-45 machines held with standard hollow brick moulds for the three common formats. Once your voltage and control language are confirmed, the unit can be crated and moved to port within a short dispatch window. Container booking and sailing dates are provided with the quotation so you can plan your site timeline before committing.
Q: How is the QMJ2-45 packed and loaded into a container for shipment?
A: The machine is partially dismantled to fit standard container dimensions, with the frame, mould set and electrical panel secured separately. Bolt points and reassembly markers are applied before dismantling so your site crew can reconstruct the unit without guesswork. Loading photographs are taken and shared before the container is sealed for your records.
Q: What is the estimated arrival time to my destination port?
A: Arrival estimates depend on your destination port and current sailing schedules. We provide an estimated arrival date alongside the quotation based on the nearest available departure. This allows you to align your site preparation, material ordering and crew scheduling around a confirmed timeline rather than working with an open-ended delivery window.
Q: Are standard hollow brick moulds included with the stocked unit or ordered separately?
A: Stocked QMJ2-45 units are held with standard hollow brick moulds for the 400×200×200 mm, 400×150×200 mm and 400×100×200 mm formats included in the package. The moulds are factory-matched to the machine frame and tested before crating. Additional or custom mould formats can be quoted separately if your market requires dimensions outside the standard range.
Q: What voltage and frequency is the stocked machine configured for and can it be changed before dispatch?
A: Stocked units are held with common industrial voltage configurations, but the final electrical specification is confirmed against your site supply before crating. If your local grid requires a different voltage or frequency, the transformer and motor wiring are adjusted during the pre-dispatch preparation. The control panel language is also set to match your operator team before the machine ships.
