Description
Stocked configuration — Every QMY4-30 is verified against your site voltage and frequency before dispatch, eliminating the three-week delay caused by mismatched motors on arrival.
Technical Specifications
| Parameter | Value |
|---|---|
| Model | QMY4-30 |
| Product Type | Mobile Egg-Laying Block Making Machine |
| Rated Power | 5 kW |
| Molding Cycle Time | 30 seconds |
| Overall Dimensions (L×W×H) | 1200 × 1200 × 1100 mm |
| Net Weight | 950 kg |
| Automation Level | Manual / egg-laying mobile type |
| Mould Format Options | Hollow block, solid brick (mould changeable) |
| Output Capacity | 480 pcs/h based on 400×200×200 mm hollow block, 4 pcs/mould |
| Output Capacity | 600 pcs/h based on 400×150×200 mm hollow block, 5 pcs/mould |
| Output Capacity | 840 pcs/h based on 400×100×200 mm hollow block, 7 pcs/mould |
| Output Capacity (8-hour shift) | 3,840 / 4,800 / 6,720 pcs corresponding to above formats |
| Assembly State | Single-unit mobile machine, no fixed plant required |
| Raw Materials | Cement, sand, crushed stones, slag |
| Voltage & Frequency | Configurable to buyer’s site supply (confirm before dispatch) |
| Control System | Confirm PLC or relay logic with supplier |
| Pallet System | Not applicable (egg-laying type, blocks laid on ground) |
Application Suitability
| Application | Material or Output |
|---|---|
| On-site block production for building contractors | Hollow blocks from cement, sand, and crushed stone directly at the build site |
| First block-making operation for small entrepreneurs | Solid bricks and hollow blocks with minimal site preparation |
| Housing and development project block supply | Local production of standard formats to eliminate transport delays |
| Remote or rural construction sites | Egg-laying production without fixed curing racks or pallet circuits |
Why the Voltage Question Must Come Before Dispatch
Confirming your site voltage and frequency before the machine leaves the factory is the single step that prevents a multi-week project stall.
I once watched a mobile block machine sit idle on a job site in South America for three weeks because the motor was wound for 380V/50Hz while the local grid ran 440V/60Hz. A variable frequency drive had to be air-freighted, and the contractor paid idle-crew costs the entire time. For buyers searching for a mobile block machine in stock fast delivery, the speed advantage disappears entirely if the electrical specification is wrong [NEED_CITE: voltage and frequency standards by export market]. The QMY4-30 ships as a single-unit machine, which means the motor, wiring, and control panel all must match the destination grid before the crate is closed.
Dispatch Timeline and Stock Positioning
Buyers working against a construction deadline cannot wait through a standard production cycle. The QMY4-30 is maintained as a mobile block machine in stock fast delivery option, meaning the core press, vibration assembly, and travel frame are assembled and tested ahead of order confirmation. Once your voltage and frequency are verified and the mould format is locked, the remaining work is final inspection, packing, and container loading.
What "Ready to Ship" Actually Covers
Stock availability means the machine body and standard moulds are built. It does not mean the electrical package is pre-wired for every market. Before dispatch, the motor winding, contactor ratings, and control panel labeling are matched to the buyer’s confirmed supply. This step takes a short period but prevents the costly on-site rework that turns a fast delivery into a project delay [NEED_CITE: CE machinery directive requirements for industrial equipment].
Reading the Output Figures Honestly
The QMY4-30 completes a moulding cycle in 30 seconds, but the hourly and shift outputs depend entirely on which block format you run. With a 400×200×200 mm hollow block mould holding 4 pieces, the machine produces 480 pieces per hour. Switch to a 400×150×200 mm mould with 5 cavities and the rate rises to 600 pieces per hour. A 400×100×200 mm mould with 7 cavities yields 840 pieces per hour. These are the only defensible output figures because they are tied to a stated format, cycle time, and mould cavity count. Any claim that ignores the block format leaves the buyer guessing at real daily throughput.
What Happens When Voltage Is Assumed Instead of Confirmed
A motor wound for the wrong frequency runs at the incorrect speed, which changes the vibration force delivered to the mould. Blocks come out under-compacted, crack during curing, and fail the compression test. The contractor blames the machine, but the root cause is a specification gap at the ordering stage [NEED_CITE: motor winding and frequency compatibility for export machinery]. Replacing the motor on site costs more than the confirmation step would have taken, and the schedule loss is unrecoverable.
Why Buyers Source This Machine Here
The QMY4-30 is treated as a matched system — machine, mould, and electrical package specified together rather than assembled from separate suppliers. Configuration is set against your target block format and local aggregate, not pulled from a catalogue default. Moulds for the formats your market actually sells are available, including custom drawings when standard options do not fit. The automation level starts at manual egg-laying, keeping the entry investment low while leaving room to add pallet-based semi-automatic lines later. Dispatch lead time is quoted upfront so you can plan container booking and site preparation against a real date.
Documentation & Verification
- Factory test record run on your specified block format before dispatch
- Voltage, frequency, and control language confirmation sheet signed before packing
- Mould drawing and format list matching your ordered cavity configuration
- Operation and maintenance manual with wear parts identification list
- Packing photographs taken at crating stage for your freight forwarder
- Customs documentation support including HS code and certificate of origin guidance
Installation, Commissioning & Support
- Flat ground surface required; no concrete foundation needed for this 950 kg single-unit machine
- Dedicated 5 kW circuit at confirmed voltage must be available before commissioning
- Machine arrives fully assembled; only mould mounting and electrical connection on site
- First production run supervised remotely or via on-site technician depending on location
- Mould change procedure covered in manual; spare mould bolts and vibration rubbers included
- Daily grease points marked on vibration shaft bearings and travel wheel axles
What We Need to Quote Your Shipment Accurately
To match the right electrical package and mould set to your order, share your local voltage and frequency, the block formats your market sells, and your target daily output. If you have a specific project deadline, tell us the site arrival date so we can confirm whether the current stock position meets it.
Frequently Asked Questions
Q: Is the QMY4-30 currently in stock and what is the dispatch lead time?
A: The QMY4-30 is maintained as a stocked model. Once you confirm voltage, frequency, and mould format, final inspection and packing are completed before container loading. Dispatch lead time is quoted at inquiry stage based on current stock position and your specific electrical requirements.
Q: How is the machine packed and loaded into a container for shipment?
A: The QMY4-30 is packed in a plywood crate measuring approximately 3 cubic meters. As a single-unit mobile machine weighing 950 kg, it can be loaded into a standard container with a forklift. Packing photographs are shared before the container is sealed.
Q: What arrival estimate can I expect from order confirmation to site delivery?
A: The timeline depends on your destination port and shipping route. Sea freight transit time is quoted at order confirmation alongside the dispatch date so you can plan site preparation and crew scheduling around a known arrival window.
Q: Are voltage and motor specifications confirmed before shipment to match my local power supply?
A: Yes. Before the machine leaves the factory, your site voltage and frequency are confirmed and the motor, contactors, and control panel are matched accordingly. This step is non-negotiable in our dispatch process to prevent on-site electrical failure.
Q: What documentation is provided for customs clearance and on-site commissioning?
A: You receive a factory test record, voltage confirmation sheet, operation manual, mould drawing, packing list, and customs documentation support. Certificate of origin and any applicable CE declaration are included based on your destination country requirements.
