Description
Stocked and Ready to Ship — we keep QMJ2-45 mobile block making machines fully assembled in our Linyi yard so dispatch happens in days, not weeks, and every unit is electrically verified against your destination grid before it leaves the gate.
Technical Specifications
| Parameter | Value |
|---|---|
| Model | QMJ2-45 |
| Product Type | Mobile Block Making Machine |
| Machine Operation | Egg-laying / mobile, moves on-site during production |
| Power Source | Electric engine (diesel not required) |
| Pallet Requirement | No pallets required |
| Labor Requirement | 1 to 3 workers |
| Mould Change | Manual, supports multiple hollow brick formats |
| Cycle Time | 25–30 seconds per mould |
| Output Capacity | 160 pcs/h based on 400×200×200 mm hollow brick, 2 pcs/mould |
| Output Capacity | 240 pcs/h based on 400×150×200 mm hollow brick, 3 pcs/mould |
| Output Capacity | 320 pcs/h based on 400×100×200 mm hollow brick, 4 pcs/mould |
| Daily Output | 1,280 pcs per 8 hr shift based on 400×200×200 mm hollow brick |
| Daily Output | 4,800 pcs per 8 hr shift based on 400×150×200 mm hollow brick |
| Daily Output | 2,560 pcs per 8 hr shift based on 400×100×200 mm hollow brick |
| Hydraulic Pressure | Static pressure type (basis to be confirmed) |
| Automation Level | Manual mobile operation |
| Assembly State | Fully assembled, mobile unit |
| Voltage & Frequency | Configurable per destination — confirm before shipment |
| Rated Power | Confirm motor rating before dispatch |
| Standards | ISO 9001:2000, CE |
Application Suitability
| Application | Material or Output |
|---|---|
| On-site hollow block production for building contractors | Crushed stone, sand, cement, and water mixed locally |
| Housing and development project block supply | Hollow blocks in 100 mm, 150 mm, and 200 mm wall thicknesses |
| Small-scale cement product manufacturing | Limited workspace with no fixed plant footprint |
| First block plant for new entrepreneurs | Low-volume start with manual mould change between formats |
Why Voltage Confirmation Comes Before the Machine Price
Ordering a QMJ2-45 mobile block making machine in stock without locking down voltage and frequency is the fastest way to turn a fast delivery into a three-week standstill on your job site.
I have watched a container arrive on schedule only for the electrician to open the panel and find a motor wound for a supply that did not match the local grid. The machine sat idle while a replacement motor was shipped. That delay erased every day the buyer had saved by choosing a stocked unit over a built-to-order line. A mobile block making machine in stock is only fast if the electrical configuration matches the destination before the crate closes.
When the QMJ2-45 ships from our yard, the motor rating, control wiring, and frequency must all align with the site power supply at the receiving end [NEED_CITE: voltage and frequency standards by export market]. Skipping this step is not a paperwork oversight — it stops production completely and pushes a project schedule back by the time it takes to source and fit a correct motor locally.
Dispatch Timing That Matches a Fixed Project Deadline
A construction contractor working to a handover date does not have room for a two-month production queue. The QMJ2-45 is held as a stocked, fully assembled unit so that once the electrical parameters and mould selection are confirmed, the machine can be dismantled for container loading and dispatched within a matter of days. Arrival timing is quoted against the buyer’s destination port before the order is committed, so the site team knows when to expect the unit — not after the container has already left.
Container Loading and What Happens Between Yard and Site
The QMJ2-45 is compact enough to load without oversized cargo arrangements, but it still needs to be broken down from its assembled state to fit standard container dimensions. We handle the dismantling sequence, pack bracing, and loading plan so that reassembly on site is straightforward. Packing photographs are taken before the container doors close, and customs documentation support is prepared alongside the shipment so that clearance at the destination port does not become the next bottleneck [NEED_CITE: export packing and customs documentation requirements for industrial machinery].
Reading the Capacity Numbers Honestly
The QMJ2-45 produces hollow blocks on a 25–30 second cycle per mould, but what that means for daily output depends entirely on the block format you are running. With the 400×200×200 mm hollow block, two pieces come out of each cycle, giving 160 pieces per hour and 1,280 over an eight-hour shift. Switch to the 400×150×200 mm format at three pieces per cycle and the hourly rate rises to 240, with a daily figure of 4,800. The smaller 400×100×200 mm format yields four pieces per cycle — 320 per hour, 2,560 per day. These numbers are real only if the operator maintains the cycle rhythm and the mix design is consistent. They are not ceiling figures to plan a project around.
What Happens When Pallets and Power Are Skipped in Planning
Some buyers assume a mobile machine removes every ancillary decision. The QMJ2-45 does eliminate pallet purchasing and pallet handling labor — blocks are laid directly on the ground as the machine moves forward. But the ground must be level and cured enough to bear the next pass. And the electric motor, while freeing the site from diesel supply constraints, demands a stable power source with the correct voltage and frequency. Overlooking either one does not reduce output gradually — it stops the machine [NEED_CITE: on-site power supply requirements for electric construction equipment]. A pallet-free machine that cannot run is not saving anyone time.
Buying From a Yard That Ships This Model Regularly
The QMJ2-45 is one of the machines we load most often from our Linyi yard, which means the dismantling sequence, container bracing plan, and loading pattern are practiced rather than improvised each time. We confirm voltage and motor rating against the buyer’s grid before the machine leaves — not after it arrives. Moulds for the standard hollow block formats ship with the unit, and additional stock moulds can be added to the same container. Factory test records are completed before dispatch, and packing photographs are provided so the buyer sees exactly what is inside the container before it reaches the port. The focus is on removing every reason the machine might sit unopened or unpowered after arrival.
Documentation & Verification
- Factory test record completed on your requested hollow block format before dispatch
- Voltage and frequency confirmation sheet signed off against your site supply
- Container loading plan with packing photographs taken before doors close
- Machine specification sheet with cycle time stated per block format
- Mould drawing and format list matching the moulds included in the shipment
- Customs documentation support prepared alongside export packing
Installation, Commissioning & Support
- Reassembly on site follows a documented dismantling sequence from our yard
- Electric motor connection verified against confirmed voltage and frequency before first start
- Manual mould change demonstrated across all included hollow block formats
- Operator training covers cycle rhythm, mix consistency, and ground preparation
- Wear parts and replacement mould list provided at the time of shipment
- Ongoing support for additional mould orders in formats your market requires
What to Share When You Request a Quote
Send the block formats your site needs to produce, the daily volume you are targeting, and the voltage and frequency available at the project location. If the site is already active, let us know the ground conditions and whether a water supply is available for the mix on site. The more precise the electrical and format details up front, the shorter the gap between order confirmation and machine arrival.
Frequently Asked Questions
Q: Is the QMJ2-45 currently in stock and what is the dispatch lead time?
A: The QMJ2-45 is held as a stocked, fully assembled unit in our Linyi yard. Once voltage, frequency, and mould selection are confirmed, dismantling for container loading and dispatch typically takes a matter of days. Exact lead time is quoted against your order date and destination port before you commit.
Q: How is the machine loaded into a container and what are the shipping dimensions?
A: The QMJ2-45 is broken down from its assembled running state to fit standard container dimensions. We manage the dismantling sequence, pack bracing, and loading plan. A loading plan and packing photographs are provided before the container doors close so you know exactly how the machine is stowed.
Q: What voltage and frequency is the electric motor configured for, and can it be changed before shipment?
A: The motor rating is configurable against your site power supply. Voltage and frequency must be confirmed before the machine leaves our yard — this is the single most common cause of on-site delays when overlooked. We verify the electrical configuration as part of every dispatch checklist.
Q: What block formats and moulds ship with the machine, and which are available as stock add-ons?
A: The QMJ2-45 ships with moulds for the hollow block formats specified in your order. Standard stock add-on moulds for additional wall thicknesses or dimensions can be loaded into the same container. Custom mould designs are also available to buyer drawings with lead time quoted separately.
Q: What is the arrival estimate from order to site delivery for common destinations?
A: Arrival timing depends on the destination port and shipping line schedules. We provide an estimated arrival window at the quotation stage based on your confirmed destination, so you can plan site preparation and crew availability around a known timeframe rather than an open-ended wait.
